Behlen Aerosols#2

Aerosol Finishing Tips --
continued from page 1

Aerosol Uses

SEALERS
Behlen Sanding Sealer performs a variety of functions. Sanding Sealer seals in the original finish on spot repair work to which toning shades or a clear finish will be applied. Two coats of sealer over a newly stained surface cuts down the number of clear lacquer topcoats required. Always seal the wood before topcoating it saves time and lowers the cost. Sanding Sealer can be used to fill light scratches on any previously finished piece; sand between coats and reapply until scratches are no longer visible.

CLEAR TOPCOATS
Behlen clear aerosols are available in the following sheens: gloss, satin or flat*.
(*Jet Spray only.) Behlen clear lacquers are nitrocellulose based, have a slight amber cast and are recommended as topcoats for Jet Spray wood shades and Behlen wood stains.
Behlen also offers a Master Water Clear Acrylic and Pre-Catalyzed Lacquers.

SHADING WITH AEROSOLS
Jet Spray Aerosols are available in a large selection of wood shades which are very lightly color pigmented so as not to obscure the grain.
Jet Spray Aerosols can be used to change the color of a previously finished piece from light to dark or to alter a shade. For example, a walnut finish can be changed into a mahogany; a blond finish can be changed into a maple or walnut. Padded” or “burn-in” repairs and light scuffs can be blended in by carefully feathering in the proper color.

UNFINISHED FURNITURE
An inexpensive stain and finishing method for unfinished furniture is to spray with Jet Spray wood shades. Always apply the spray in light coats so as not to achieve a painted effect.
Once the color is satisfactory, three coats of a clear Behlen aerosol should be applied to protect the finish from wear.


	H. BEHLEN Jet Spray & MASTER Aerosols Aerosol Finishing Tips -- continued from page 1 Aerosol Uses SEALERS Behlen Sanding Sealer performs a variety of functions. Sanding Sealer seals in the original finish on spot repair work to which toning shades or a clear finish will be applied. Two coats of sealer over a newly stained surface cuts down the number of clear lacquer topcoats required. Always seal the wood before topcoating it saves time and lowers the cost. Sanding Sealer can be used to fill light scratches on any previously finished piece; sand between coats and reapply until scratches are no longer visible. CLEAR TOPCOATS Behlen clear aerosols are available in the following sheens: gloss, satin or flat. (Jet Spray only.) Behlen clear lacquers are nitrocellulose based, have a slight amber cast and are recommended as topcoats for Jet Spray wood shades and Behlen wood stains. Behlen also offers a Master Water Clear Acrylic and Pre-Catalyzed Lacquers. SHADING WITH AEROSOLS Jet Spray Aerosols are available in a large selection of wood shades which are very lightly color pigmented so as not to obscure the grain. Jet Spray Aerosols can be used to change the color of a previously finished piece from light to dark or to alter a shade. For example, a walnut finish can be changed into a mahogany; a blond finish can be changed into a maple or walnut. Padded” or “burn-in” repairs and light scuffs can be blended in by carefully feathering in the proper color. UNFINISHED FURNITURE An inexpensive stain and finishing method for unfinished furniture is to spray with Jet Spray wood shades. Always apply the spray in light coats so as not to achieve a painted effect. Once the color is satisfactory, three coats of a clear Behlen aerosol should be applied to protect the finish from wear. H. BEHLEN & BRO. An RPM Company Rev. 5/02 - H. BEHLEN		B101 - Jet-Spray Series B101-0800 .... Clear GLOSS B101-0801 .... Clear SATIN B101-0802 .... Clear FLATT B101-0803 .... Clear Sanding SEALER B101-0809 .... Walnut Dk American = 0890 B101-0813 .... Natural B101-0815 .... OAK Golden B101-0817 .... Umber Raw B101-0818 .... Umber Burnt B101-0822 .... OAK Medium B101-0829 .... Mahogany Medium B101-0831 .... Mahogany Dark B101-0832 .... Mahogany Brown B101-0850 .... Walnut Extra Dark B101-0853 .... Walnut Medium Brown B101-0858 .... Cherry B101-0867 .... BURN-IN / Sheen Protector B101-0871 .... Blush Eraser B101-0873 .... Mahogany Red B101-0878 .... Brown Van Dyck B101-0883 .... Clear DEAD FLATT B101-0892 .... Maple B101-F826 .... Black Flatt B101-G804 .... White Gloss B101-G826 .... Black Gloss B101-L854 .... Fruitwood Lite B101-S826 .... Black Satin B103 - MASTER Series B103-012 .... Clear Top Coat Lac. GLOSS B103-014 .... Clear Top Coat Lac. SATIN B103-015 .... Clear Amber Sanding Sealer Clear Acrylic Lcquers B103-016 .... Water Clear Acrylic Gloss B103-017 .... Water Clear Acrylic Satin Clear Pre-Cat Lcquers B103-020 .... Pre-Cat Lacquer Gloss B103-021 .... Pre-Cat Lacquer Satin B103-023 .... Pre-Cat Lacquer SEALER B103-267 .... Scratch Off, Dk. Walnut / Oak B103-509 .... Dark Walnut Toner B103-510 .... Tavern Pine Toner B103-512 .... Walnut Van Dyck Toner B103-513 .... Natural Toner B103-515 .... Golden Oak Toner B103-518 .... Walnut Toner B103-528 .... Dark Red Walnut Toner B103-529 .... Mahogany Toner available from: Wood Finish Supply