Star Finishing Products

Product Information - PDS-3

NGR Dye Stains

NGR RETARDER

43-291 - NGR RETARDER (Slows drying)

Available Colors

NGR Reducer

43-201
43-243
43-241
43-221
43-242
43-212
43-251
43-202
43-211

Walnut
Cordovan Mahogany
Brown Mahogany
Cherry
Red Mahogany
Medium Oak
Maple
Sap Walnut
Golden Oak

NGRDye Concentrates
43-283 ........... Black
43-282 ........... Red
43-284 ........... Orange
43-281 ........... Yellow
forBlue&Green
(See Haps Compliant NGR'sPDS #35)
43-291 ........... NGR RETARDER
43-292 ........... NGR Reducer

43-292 - NGR Reducer (to reduce color intensity)

Application Methods

Typically applied with stainless conventional or
HVLP spray equipment. Grain-Perfect Wiping
Stains or glaze may be used directly over NGR
stains. Improved color control and uniformity may
be gained by using a washcoat between the NGR
and Grain-Perfect stain or glaze. NGR Stains may
exhibit a slight color fade after prolonged exposure
to direct sunlight.

DOT Shipping Information

Shipping Name: ............... Paint
Hazard Class: ................... 3
I.D. Number: .................... UN-1263
Packing Group: ................ II

Features

Safety and Storage Precautions

NGR (Non-Grain Raising) stains are alcohol
(methanol) satyle soluble dye concentrates that are
used to create wood stains that offer very fast dry,
color depth and brightness, and unlimited color
combinations and strengths. Stains made by
blending the various colors may be reduced with
43-292 and sprayed directly on the wood in single
or multiple coats to achieve much of the color
strength, uniformity, undertone color and depth.
Sap stains may also be made with these products to
build the color of the sap (white) wood in wood
species such as cherry and walnut up to the typical
raw wood color. Suggested areas of use are fine
furniture and kitchen and bath cabinets.

Danger! Extremely flammable liquid and vapor.
Vapors may cause flash fire. Keep away from
heat, sparks and flame. Use only with adequate
ventilation.

Do not breathe vapors or spray mists.
Vapor harmful. May affect the brain or nervous
system causing dizziness, headache or nausea!
Wear an appropriate, properly fitted respirator
(NIOSH/MSHA Approved) during and after
application or provide adequate air movement to
keep airborne contaminants below the OSHA
PEL's. Follow respirator manufacturer's directions
for respirator use. Close container after each use.
Store in cool, dry area. If spilled, contain spilled
material and remove with inert absorbent. Dispose
of contaminated absorbent, container and unused
contents in accordance with local, state and federal
regulations.

Physical Properties

Weight Solids: .............. Ranges from 1.5% to 3.5%
Volume Solids: ............. Ranges from 0.9% to 2.6%
Dry Time: ..................... 5 minutes to seal.
VOC:............................ Ranges from 6.4 lbs. /gal. to 7.1
lbs./gal.
Weight Per Gallon: ....... from 6.6 lbs./gal. to 7.2 lbs./gal.
Flash Point:................... 50º F, TCC

Ingestion of this product may result in blindness
and possibly death. Consult a physician
immediately if swallowed.

Continues---

Rev. 4/00

Product Data Sheet#3-- NGR Dyes & Concentrates

page 1 of 2