Shellac Flatt is a ‘Flatting’ agent specifically formulated to reduce the sheen of shellac.
Before use, make sure your Shellac solution is well mixed and fully dissolved
(especially if mixed from dry flakes).
(For clarity and consistent result add Shellac Flatt to the top or last coat of finish only.)
SHAKE WELL BEFORE USE.
Suggested Mixing Ratios for Shellac Flatt -- in a 2 Pound cut of Shellac
| Suggested Mixing Ratios for Shellac Flatt -- in a 2 Pound cut of Shellac |
|
Sheen
|
Amount
|
Pint
|
Quart
|
Gallon
|
| Semi-Gloss |
5% Shellac Flatt |
.08 Oz.
|
1.6 Oz.
|
6.4 Oz.
|
| Satin |
10% Shellac Flatt |
1.6 Oz.
|
3.2 Oz.
|
12.8 Oz.
|
| Low Satin to Flatt |
15% - 20% Shellac Flatt |
2.4 Oz.
|
4.8 Oz.
|
19.2 Oz.
|
Caution: Wear chemical splash goggles and gloves when handling.
USE In Well Ventilated Area
Inhalation of vapor may cause drowsiness and irritation.
First Aid: If swallowed; drink several glasses or water and seek medical advise.
For eye contact; flush with flowing water for at least 15 minutes
and get immediate medical attention.
For skin contact; wash area with soap and water.
(If skin irritation persists, seek medical attention. If inhaled; move to fresh air.
Hazardous Ingredients:
Isopropanol Alcohol ..... CAS # 67-63-0
Polyproylene Hydrocarbon Mixture ..... CAS # N/A
Dipropylene Glycol Monomethyl Ether ..... CAS # 34590-94-8
Silicon Dioxide ..... CAS #11296-00-8
HMIS RATINGS: Health [1] Flammability [3] Reactivity [0]